Saturday, October 25, 2014
Browse »
home »
circuit
»
control
»
diagram
»
digital
»
volume
»
Digital Volume Control Circuit Diagram
Digital Volume Control Circuit Diagram
This circuit could be used for replacing your manual volume control in a stereo amplifier. In this circuit, push-to-on switch SW1 controls the forward (volume increase) operation of both channels while a similar switch SW2 controls reverse (volume decrease) operation of both channels. A readily available IC from Dallas semiconductor, DS1669 is used here.
Circuit Diagram:
Parts:
J1 = RCA Audio Input Socket
J2 = RCA Audio Input Socket
C1 = 0.1uF-16V Ceramic Disc Capacitor
C2 = 0.1uF-16V Ceramic Disc Capacitor
C3 = 0.1uF-16V Ceramic Disc Capacitor
IC1 = DS1669 (is available from Dallas SCo.
SW1 = Momentary Push Button Switch
SW1 = Momentary Push Button Switch
Notes:
Circuit Diagram:
Digital Volume Control Circuit Diagram
Parts:
J1 = RCA Audio Input Socket
J2 = RCA Audio Input Socket
C1 = 0.1uF-16V Ceramic Disc Capacitor
C2 = 0.1uF-16V Ceramic Disc Capacitor
C3 = 0.1uF-16V Ceramic Disc Capacitor
IC1 = DS1669 (is available from Dallas SCo.
SW1 = Momentary Push Button Switch
SW1 = Momentary Push Button Switch
Notes:
- Replaces mechanical variable resistors.
- Electronic interface provided for digital as well as manual control.
- Wide differential input voltage range between 4.5 and 8 volts.
- Wiper position is maintained in the absence of power.
- Low-cost alternative to mechanical controls.
- Applications include volume, tone, contrast, brightness, and dimmer control.
- The circuit is extremely simple and compact requiring very few external components.
- The power supply can vary from 4.5V to 8V.
- The input signal should not fall below -0.2 volts.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment