Showing posts with label transformer. Show all posts
Showing posts with label transformer. Show all posts
Saturday, October 18, 2014
home made speaker transformer
The speaker transformer is made by winding 50 turns of 0.25mm wire on a small length of 10mm dia ferrite rod.
The size and length of the rod does not matter - it is just the number of turns that makes the transformer work. This is called the secondary winding.
The primary winding is made by winding 300 turns of 0.01mm wire (this is very fine wire) over the secondary and ending with a loop of wire we call the centre tap.
Wind another 300 turns and this completes the transformer.
It does not matter which end of the secondary is connected to the top of the speaker.
It does not matter which end of the primary is connected to the collector of the transistor in the circuits in this book.
source : http://www.talkingelectronics.com.au/projects/200TrCcts/200TrCcts.html
Read More..
The size and length of the rod does not matter - it is just the number of turns that makes the transformer work. This is called the secondary winding.
The primary winding is made by winding 300 turns of 0.01mm wire (this is very fine wire) over the secondary and ending with a loop of wire we call the centre tap.
Wind another 300 turns and this completes the transformer.
It does not matter which end of the secondary is connected to the top of the speaker.
It does not matter which end of the primary is connected to the collector of the transistor in the circuits in this book.
source : http://www.talkingelectronics.com.au/projects/200TrCcts/200TrCcts.html
Monday, September 22, 2014
Horn siren use the IT and OT transformer
Basically siren on a police patrol car and an ambulance use electronic circuit connected to the DC current. When the switch is pressed, the siren sounds immediately come out.For those of you who own a car, or any motor you can also create a similar horn. Placement was also very practical. And if you want the flashing lights can add your own. In a series of above do not use flashing lights as the sirens sound.

R1 = 47K
R2 = 200R
C1 = 0,02uF
C2 = 50uF 16V
C3 = 0,005uF
T1 = 2SB178 PNP transistor
S1 = Push button switch
G1 = 6-12V battery
TR1 , IT transformer is reversed. used a two-legged.
TR2 , OT output transformer OT240
How to use it is to put the above series into a box. Adjust the size to be more practical. Then insert the cable of a car or motorcycle battery voltage as described above that is 6-12 V battery into the plug. In accordance with their respective poles.Three feet of IT transformer wrapped so as not to stick to the body of the car or motorcycle. Cover with insulation that is resistant to water. Then try if already issued a siren sounds and if so, ready for use.
Subscribe to:
Posts (Atom)

