Wiring circuit

Showing posts with label super. Show all posts

Saturday, September 20, 2014

Fuse Box Ford 1990 Thunderbird Super Coupe Diagram

Fuse Box Ford 1990 Thunderbird Super Coupe Diagram - Here are new post for Fuse Box Ford 1990 Thunderbird Super Coupe Diagram.

Fuse Box Ford 1990 Thunderbird Super Coupe Diagram

Fuse Panel Layout Diagram Parts: rear window defroster, anti lock motor, fuse panel, headlamp, passive restraints, ignition coil, powertrain control module, fuel pump motor, auto shock, ignition switch, blower motor, anti lock module, horn, hazard, memory.

Tuesday, September 9, 2014

Super Sensitive Intruder Alarm

Here is the schema diagram of an ultra sensitive intruder alarm.The shadow of an intruder passing few meters nearby the schema is enough to trigger the alarm.

Here IC2 uA 741 is wired as a sensitive comparator ,whose set point is set by R6 &R7.The voltage divide by LDR and R9 is given at non inverting pin of IC2.At standby mode these two voltages are set equal by adjusting R9.Now the out put (pin6) of comparator will be high.Transistor Q1 will be off.The voltage at trigger pin of IC1 will be positive and there will be no alarm.When there is an intruder near the LDR the shadow causes its resistance to increase.Now the voltages at the inputs of comparator will be different and the out put of IC2 will be low.This makes Q1 on.This makes a negative going pulse to trigger the IC1 which is wired as a monostable multivibrator.The out put of IC1 will be amplified by Q2 (SL 100) to produce alarm.

Notes

* To setup the alarm ,power up the schema and adjust R9 so that LED D1 goes off.
* The LDR can be housed in a dark tube to increase sensitivity.
* The sensitivity is very important here.If you cannot adjust the required sensitivity properly, use one LOW resistance (~1K ) POT in series with R9 for fine adjustment.